|
404 XR Linear |
The 404XR is a sleek compact positioner (47.3 x 95
mm profile) capable of carrying 170 kg loads up to
a distance of 600 mm. Its quick and accurate
positioning capability can be attributed to a high
strength extruded housing, square rail ball bearing
system, and precision ground ballscrew drive.
With its low profile design the 404XR is ideal for
height restricted applications, and its lightweight
construction makes it well suited as secondary
axes on multi-axis systems. These units offer a
wide array of easily adapted options and
accessories which permit easy configuration to
specific requirements.
|
|
Direct Drive Model |
Features a revolutionary integral brushless DC motor and encoder design. This feature allows for a more compact overall package and improved system performance by eliminating backlash and wind-up. The high performance ball screw and linear bearings allow speeds up to 1,300mm / sec.
Features:
Integrated Brushless DC motor
Rugged Compact Packaging
Improved Dynamic Performance
Pre-wired Linear or Rotary Encoders
Pre-wired Limit Switches
Complete Shielded Design
All Elements Internally Located
Lowest Profile in the Industry
Integrated Brake |


|
Flanged Mount Model |
Ideal for easy mounting to any servo or step motor. For vertically mounted applications, we offer the option of a shaft brake mounted to the ball screw. Linear encoders are also available to increase positional accuracy and offer direct positional feedback regarding carriage location.
Features:
Flange Face to Mount NEMA 23 & 34, size 60 & 90mm Motors
Pre-wired Limit Switches
Pre-wired Linear Encoder
Complete Shielded Design
Integrated Brake |


|
401XR / 402XR Mini-Positioning Tables |
|
The 400XR precision linear positioners family has achieved global recognition for consistent accuracy, reliable performance ,high strength, and unmatched versatility. The XR's have excelled in industries such as fiber optics and instrumentation, where the highest degree of precision is demanded. And yet, because of the rugged construction, strength, and seals design, these units have been used extensively for industrial automation applications (packaging, automotive, etc.)
The 401XR and 402XR "Mini" Series positioners enhance the 400XR family of precision linear positioners, addressing applications which involve precise positioning of smaller payloads within a very small space envelope. These ballscrew driven positioners were developed to address the needs of industries such as photonics, life sciences, semi-conductor, and instrumentation, where technology advancements dictate miniaturization of work envelopes.
Features:
Only 1.6 inches wide
Sealed Design - IP30 rated
Multi-axis ready
Selectable Options
|
|
400XR Linear Square Rail Bearing Series |
Modular Flexibility" is the attribute that clearly distinguishes the Daedal 400XR family of linear tables from all others. They are rugged enough to perform well in the industrial automation environment (automotive, packaging) and yet they're precise enough to excel in the high end (semi-conductor, instrumentation) markets. Premier performance, modular compatibility, and quick delivery make these easy to use tables the perfect building blocks for multi-axis systems. Allowing the designer to build a system without costly customization.
Features:
Travels up to 80 inches
Ballscrew or leadscrew drive
Repeatability of +/-0.00005 inches (bidirectional)
Load capacity
Normal 1400 lbs
Axial 460 lbs
High efficiency ballscrew drive
High strength aluminum body
IP30 rated strip seals
|

| Top | |
|
408000ST - 424000ST Linear Square Rail Bearing Series |
The Daedal 400000ST series is designed for applications requiring accurate positioning of heavy loads. Available in 8, 12, 18, and 24 inch widths, the 400000ST series is ideal for multiaxis applications. When equipped with the optional protective bellows, this table series can be used in lightweight machine tool applications. Travel 4 - 60 in. Load up to 2340 lbs. Screw speed up to 50 rps. Ground Ballscrew and large Square Rail Linear Bearings. |

 |
800CT Cross Roller Series |
Daedal's 806000 series with precision ground cross roller ways, precision grade ball screw and low profile, meets demanding application requirements at a price considerably less than comparable tables:
Travel to 12 inches ( 300 mm),
Load to 280 lbs ( 128 kgs).
Screw speed to 60 rps.
Repeatability, Std, +/-0.0002 inches ( +/- 5 micon)
Prec. +/- 0.00005 inches ( +/- 1.3 micron ).
|


|
High Speed Linear Modules |
DESIGN FEATURES
Compact, aluminum chassis with special hardcoat finish for high durability. Permanently sealed ball bearings with composite wheel tread fro long life and high speed capability.
IP30 rated stainless steel strip seal for protection against harsh environments. Wear-resistant polyurethane timing belt with high tensile steel core members. T-slots integrated into the carriage load attachment plate for easy payload mounting.
OPTIONAL FEATURES
Direct mounting of NEMA steppers , servo motors, or planetary reducers. Limit switch assembly, with home and end-of-travel switches, including mounting hardware and cable carrier and trough.
PERFORMANCE FEATURES
Travel(Max) 3 to 9.2 meters
Load(Max) 710N(160lbs) to 6800N(1500lbs)
Speed(Max) 5 meters/sec
Repeatability 0.1mm (.004")
Nominal carriage life 25,000 km(15,000 miles)
 |
High Speed Belt Drive Cross Section Profile: 60RB, 60SR(60mm), 80RB(80mm), 100RB, 100SR(100mm), and 150RB(150mm) and HPLA/80 (180mm) |
 |
Bearing Types: Roller Wheel = RB, Square Rail = SR |
 |
Drive Type: Belt |
|


|
HLE-Z Linear Actuator |
The HLE-Z offers a unique rack and pinion style drive mechanism that enables travel distances greater than those attainable with a belt drive.
The carriage is independently driven; therefore, more than one carriage can be employed on a given axis. High dynamic stiffness regardless of travel length. Can be spliced to achieve travels and performance well beyond that of a belt and pulley.
No lubrication required.
Travels to 50 meters.
Multiple "driven" carriages per rail.
|


|
Rotarty Tables |
|
|
Actuator BG Type |
High Accuracy Single Axis Actuator BG Type
NB's BG Type is a compact single axis actuator which integrates a Slide Guide and Precision Ball Screw. BG Type offers compact dimensions, which outperforms conventional positioning tables. This is made possible by a unique "U" shaped Guide Rail and Slide Block which provides multiple functions of a Guide Block and a Ball Screw Nut combined into a single unit. The "U" shaped Guide Rail design offers a high rigid structure resistant to bending. This structural feature allows for integrated frameworks of machinery or equipment. Additionally, the Slide Block contains 4 ball circuits which delivers high load capacity, high accuracy and high rigidity. |


|
End Supported Air Bearing Slides |
| New Way® end supported air slides combine an accurate guide with an air slide ready-fit for installation. This provides the user with the convenience of integrated guide and bearing systems. These slides have a straightness of motion and dynamic response often an order or magnitude better than conventional rolling element bearings. The use of these ultra-precision components can add a significant competitive advantage to your equipment. |
|
Dovetail Air Bearing Slides |
New Way® Dovetail air slides combine an accurate guide with an air slide ready-fit for installation. This provides the user with the convenience of integrated guide and bearing systems. These slides have a straightness of motion and dynamic response an order or magnitude better than conventional rolling element bearings. The use of these ultra-precision components can add a significant competitive advantage to your equipment.
The dovetail guidebar can be end-supported, or continuously-supported. A continuously-supported dovetail will prevent guidebar sag that can occur with a long span end-supported configuration.
The dovetail also contains a space between the guidebar and stage where a linear motor or other driver can be mounted. |
|
|