|
General
Purpose & Specialty Sensors
Can Solve Your Detection Problems Once & for
All!
|
 For most packaging, material handling
and industrial applications,
our versatile limit switches
simplify your selection and
stocking because a single part
number can give you all the
options needed for the job.
Omron understands that worker
safety is an issue of major
concern to you and manufacturers
all over the world. Their innovations
focus on securing the interactions
between man and machine by
applying safety components
such as safety door switches
and limit switches. Omron's
safety door switches and limit
switches comply with European
Law and they issue a declaration
of conformity so you can affix
the CE mark to the machine.
Their extra effort designing
their safety door switches
and limit switches gives you
a
big advantage in reaching new
markets and smoothes the way
for export by reducing or eliminating
some inspections.
Omron manufactures cost-effective,
compact safety door switches
and limit switches for a wide
variety of applications.
Additional door / limit switches
are located with the SAFETY-RELATED products. |
|
Enclosed Limit Switches |
D4C - Limit Switch Compact Body SPDT 5A @250VAC Pre-Wired
|
|
Sealed, Compact, Slim Prewired Limit Switch
- Rugged die cast housing
- Meets UL types 3, 4 and 13
- Triple-sealed construction
- Designed for easy gang mounting
- Rated load of 5 amps, 250 VAC
- Prewired with 3m (9.8 ft) or 5m (16 ft) of cable
Specifications
- Load rating: SPDT: 5 A maximum at 250 VAC, NEMA B300
- Mechanical life: 10 million operations
- Connection: Pre-wired with 3 or 5 cable
|
|
D4CC Limit Switch Compact Body 1A @125VAC M12 4-pin Connector
|
|
Compact, Enclosed Limit Switch
- Connector-ready for quick installation and replacement
- New center roller lever model for compact installation and gang mounting
- Triple-seal construction meets UL Types 3, 4, and 13
- Panel-mount types available
- M12 MicroChange connector cordsets available
- UL/CSA approvals
Specifications
|
|
ZE/ZV/ZV2 - Limit Switch Precision Body High Switching Capacity SPDT 15A @125VAC |
|
ZE- Large Switching Capacity and Long Service Life
- 15-amp, 125 VAC switching capacity
- Wide selection of actuators
- Rugged die cast housing
- Sealed (booted) switches meet NEMA types 1, 2, 3, 4 and 5
- Three mounting styles available: -Side mounting (ZE) -Diagonal side mounting (ZV2) is ideal for gang mounting several switches - Flanged base mounting (ZV)
Specifications
- Load rating: SPDT, 15 A maximum at 125 VAC, NEMA B300 or 1 A maximum at 30 VDC
- Mechanical life: 10 million operations
- Connection: Screw terminals on internal switch face forward when the cover is opened
|
|
D4MC - Limit Switch Precision Body SPDT 10A @125VAC Roller & Hinged Lever Acuators
|
|
Economical, General-Purpose, Enclosed Switch
- High precision and long life (10,000,000 mechanical operations)
- Gasket diaphragm seal provides high environmental resistance
- Suitable for applications demanding higher mechanical strength, dustproof and drip-proof properties
- Pre-wired types with molded terminals are available on special request
Specifications
- Control output: SPDT (form C), rated 10 A maximum at 125 VAC (inductive load)
- NEMA A300 rated
- Dimensions: 47 H x 21.7 W x 60 D mm (switch body with boot)
|
|
D4E-N - Limit Switch Precision Body SPDT 5A @125VAC Roller & Hinged Lever Sealed Acuator
|
|
Slim and Compact with a Long Life
- Cover protects the built-in switch from dust and oil
- Durable plunger sealing cap ensures long life
- Connector type, screw-terminal type and pre-wired type are available
- Micro load type uses gold-clad contacts
- Designed for gang mounting
- Molded terminal types and operation-indicator types are available
- Approved standards
Specifications
- Control output: SPDT (form C), rated 5 A maximum at 125 VAC (inductive load)
- NEMA A300 rated
- Dimensions: 36.4 H x 18 W x 43 D mm (switch body)
|
|
SHL - Limit Switch Precision Body SPDT 10A @125VAC with Coil Spring Acuator Mechanisms
|
|
Subminiature Enclosed Switch
- Coil-spring switch housed in rigid zinc die cast alloy boasts long life and high precision
- Requires nearly the same operating force as a conventional precision switch (0.53 to 0.88 lbf)
- Molded terminal model is available
- UL, CSA and/or EN (IEC) approvals
- Operation-indicator models are available
Specifications
- Control output: SPDT (form C), rated 10 A maximum at 125 VAC (inductive load)
- Microload types rated at 0.1 A
- UL & NEMA A300 rated
|
|
General
Purpose Limit Switches
|
WL - Limit Switch SPDT 10A @ 125VAC IP67 Rate |
|
Rugged diecast aluminum housing with high mechanical, Rated IP67,Load rating: 10 A max. at 125 VAC, NEMA A600, High-precision models, ideal for position control, require a very small movement to operation (approx. 5°) and a repeat accuracy that is twice that of basic models. LED or neon lamp status indicator models available
|
|
D4A-N - Limit Switch DPDT/SPDT 5A/10A @125VAC Double Seal Head & Gasket Head Cover |
|
Heavy Duty SPDT and DPDT Switches with Plug in Construction
- Oil-tight, watertight construction with double seal on the head, a complete gasket cover
- Plug-in construction reduces downtime for maintenance
- Convenient front mounting simplifies installation
- User selectable operating direction for side rotary switches-CW,CCW or both
- Position and lock the operating head at any of four 90° positions
- Wide Operating temperature range: 40° to 100°C (Side rotary)
- Side rotary switches accept a wide selection of levers
- DPDT, double-breaks models available for sequential operation and center neutral switching
- Approved by UL,CSA, and CCC (Chinese standard)
Specifications
- Load rating: SPDT double break: 10 A maximum at 125 VAC, NEMA A600
- Load rating: DPDT double break: 5 A maximum at 125 VAC, NEMA B600
- Mechanical life: SPDT double break: 50 million operations; DPDT double break: 30 million operations
|
|
Special Purpose Switches |
D5B - Tactile Switch SPST 1-30mA @5-30VDC Corded with Three Acuator Style |
|
Detects Objects in Multiple Directions with High Sensitivity
- Detects object contact from multiple directions and operates even with a slight force
- Movement differential as small as 0.01 mm (0.0003 in) assures high accuracy of detection
- Gold-plated contacts capable of switching micro current/voltage load and providing high contact reliability
- Highly resistant to dust, fine particles and water or oil splash, conforming to IP67
- Three sizes (M10, M8, and M5). Three types of actuators: hemispheric, cone-shaped, and wobble-stick type
Specifications
- Control output: SPST double break; 1 mA at 5 VDC to 30 mA maximum at 30 VDC (resistive load)
- Dimensions: M5 x 24.5 L mm (hemispheric); 27 L mm (cone-shaped); 64.1 L mm (wobble stick)
- Dimensions: M8 x 28 L mm (hemispheric); 32.5 L mm (cone-shaped); 92.8 L mm (wobble stick)
|
|
|
