Series RFID System

V600

Intelligent Flag I RFID Sensor System

V600-HA

Superior to MechanicalFlags.
Space-Saving Design.
8-Bit Memory Identification.

Intelligent Flag II RFID Sensor System

V600-HA

Intelligent Flag III RFID Sensor System

V600-HAM42-DRT

Superior to MechanicalFlags.
Provides DeviceNet Interface.

Hand Held Reader-Writer

V600-CH1D

Connects directly to a personal computer or PLC via
RS-232C.
Protective construction of the main unit is IP63 (IEC standard) for outdoor applications.
Compatible with V600-series Data Carriers connected to existing systems.
Reads and writes Data Carrier data.
Special commands allow the Reader/Writer to read and write data within the Data bCarrier across several regions at once.
Data transmissions are activated by using commands
from the main unit or by using a switch on the Reader/Writer.

Data Carrier

V600-D23P55

Passive tag technology (no internal power source for
communications).
Operates at 530 kHz.
256 Bytes EEPROM memory.
-40°C to 150°C storage temperature.
-25°C to 85°C operation temperature.
100,000 read/write cycles at -20°C to 85°C.
800,000 read/write cycles at -20°C to 0°C.
Durable LCP resin construction.
Up to 10 mm transmission distance.
Ultra small - 8 mm diameter x 5 mm.
For metal/non-metal flush- mount applications
Virtually unlimited read-only cycles.

Data Carrier

V600-D23P66N

Passive tag technology (no internal power source for
communications).
Operates at 530 kHz.
256 Bytes EEPROM memory.
-40°C to 150°C storage temperature.
-25°C to 85°C operation temperature.
100,000 read/write cycles at -20°C to 85°C.
800,000 read/write cycles at -20°C to 0°C.
Durable PPS resin construction.
Up to 45 mm transmissiondistance.
Integrated mounting system.
For non-metal applications (metal applications use V600- A86 Tag Bracket).
Virtually unlimited read-only cycles.

CJ1W / CS1W ID Sensor Modules

V600

These modules can be combined with OMRON's
comprehensive lineup of PLCs to create an optimum system.
Operations are the same for Single-head and
Double-head Units,enabling effective reuse of ladder programs.
A simple test function allows communications status to be checked without special programming to greatly speed up the system startup.
Maintenance is simplified by a power supplyfailure flag and a monitoring function for communications turn-a-
round time and error code.

Read / Write Head

Operates at 530 kHz.
-25°C to 75°C storage temperature.
-10°C to 40°C operation temperature.
Up to 12 mmtransmission distance (application
dependent).
Durable ABS and epoxy plastic construction.
For metal / non-metal applications.

Read / Write Head

V600-H51-1

Operates at 530 kHz.
-25°C to 75°C storage temp.
-10°C to 40°C operation temp.
Up to 12 mm transmission distance (application
dependent).
Threaded cylindrical exterior.
Durable brass, ABS and epoxy plastic construction.
For metal and non- metal through-hole mounting
applications.

High-speed communications requiring only 14 ms to read or write 128 bytes of
data.
Long-life battery-free tags to read and write data 1,000 million times.
Versatile functions, such as auto repeat, repeat input trigger, and tag specification.
Self-execution mode for data processing
with no host controller intervention.

ID Controllers, RS-485 Interface

V700-CD2D-V2

Selective access: A function that allows communications with a specific data carrier that is among multiple data carriers, within the communications area.
Multi-trigger with communications end code: A function that notifies the host when communications with all data carriers within the communications area has completed.
Data lock: This function permanently disables the overwriting of data on the data carrier.
Serial number readout: A function that reads the factory assigned data carrier serial number.
Master/slave controller switching from host unit: A function that allows the host to set the master/slave controller settings.

Data Carrier(s)

V700-D23P41

For non-metal applications
Ultra-thin 4.0 mm x 25 mm
Passive data carrier technology (no internal power source for communications)
Operates at 125 kHz
Up to 240 mm transmission distance (application dependent).
EEPROM memory
256 bytes total memory capacity
10-year data storage.
100,000 read/write cycles (per address).-40°C to 110°C storage temperature.
-25°C to 70°C operation temperature.
Waterproof- Durable PBT (polybutylene terephthalate) and epoxy resin construction.
Drill hole mounting.

Electromagnetic Inductive RFID System

V720

Multi-Tag Read & Write Capability.
Adaptable Data Carrier & Antenna Designs.
13.56 MHz Transmission Frequency.

CF Card-Type RFID System

V720S-HMF01

Applies i-CODE1 chip and i-CODE SLI (ISO/IEC 15693) chip technology from Phillips Semiconductors.
Readily available Windows CE based PDA interface: Compact Flash Type 2 (www.compactflash.org/).
Highly versatile functions, such as Read/Write modes, in a compact size.
Combining the V720S-HMF01 with a Windows CE-based PDA costs much less than most hand-held RFID readers.

ID Controller

V720S-CDD

Equipped with single access (1 to 1), multiple access (1 to n), selective access, and FIFO queue functions.
General-purpose RS-232C or RS-485 command/response interface for host.
Conforms to EC directives and FCC.
Small and easy to install.

Longest Range Read/Write Antennas / Cables

V720S-H03

The communications distance and communcations range are respectively 1.6 and 2.6 times greater than Omron's standard antenna.
Special antenna cable available.

V720S-H01

Easy installation.
High accuracy in dirty or dusty environments.
Conforms to ISO 15693 for non-contact cards.
Conforms to EC directives and FCC.
Both i-CODE1 and i-CODE SLI available.
Six different cable lengths.

Gate Antennas

V720-HS71

Gate widths up to one meter.
Compatible with three tag directions.
Simultaneously read multiple tags.
Stand-alone EAS (Electronic Article Surveillance) mode that requires no host computer.

PCB-type Read/Write Modules

Compatible with Phillips i-CODE1 and ISO/IEC 15693 i-CODE SLI tags.
Compact size and includes a Read/Write function.
Conform to standards for small-signal stations.
User-friendly host command structure.
Support host interface with two-wire, half duplex serial comm. system at CMOS level.

System Reader/Writer

V720S-BC5D

Two antenna terminals available.
RS-232C and RS-485 interfaces.
Multi-drop connection up to 32 antennas.
Both i-CODE1 and i-CODE SLI types.
Durable construction conforms to IP65. User-friendly host command structure.

ID Tags

V720S-DP

Models conform to ISO 15693.
Sealed in either PET resin or pouch style PET sheets.
Apply Philips Semiconductors i-CODE chip technology.
Both i-CODE1 and i-CODE SLI types available.

ID Tag Inlets

V720S-DP-RK

Conforms to ISO 15693.
Thin and flexible, withstand bending.
Easy secondary processing onto business forms (roll-to-roll).
Apply Phillips Semiconductors i-CODE chip technology.
Both i-CODE1 and i-CODE SLI types are available.
Custom sizes available.