Advanced Motions Systems- Measurement

MEASUREMENT

ZS Series

The ZS-L’s ability to provide high-speed image processing and high resolution is thanks to Omron’s innovative 2-D CMOS image sensor. The sensor features an enhanced controller running a powerful algorithm, which ensures optimal sensitivity, no matter how varied the reflected light. The image is processed in the sensor head and transferred to the controller via a Low Voltage Differential Signal (LVDS). This arrangement results in a high-performance platform that can measure almost any surface.

ZS-L

Omron's General Purpose & Specialty Sensors
Can Solve Your Detection Problems Once & for All!

For most packaging, material handling and industrial applications, our versatile measurement sensors simplify your selection and stocking because a single part number can give you all the options needed for the job.

Contact

High-Precision Tactile Switch

D5A

	1 to 3 micron repeat accuracy.
	Ideal for measuring wear of cutting tools.
	24 VDC solid state or 12 / 24 VDC contact outputs.
	Solid state model has status LED

High Precision, 4-way Optical Switch

D5F

	Four-way switch.
	Actuators have wear-resistant ceramic parts.
	PNP & NPN output types available.
	Knife-edge mechanism in the optical system provides greater precision for a more stable output.

LVDT Contact, Linear Sensor

D5M

	5 or 10 mm measurement distance.
	4-20 mA analog output.
	High repeat accuracy of 10 microns.
	IP67 rating resists oil and water spray.
	Roller and ball plunger actuators available.

Low Cost Contact Displacement Sensor

D5V

	Compact 1.57"H x 2.36"W x 0.7"D
	5mm travel / measurement distance.
	Low 30 gf operating force
	4-20 mA analog output.
	10 micron resolution.
	Ball, Pin, and Flat actuators available.

Inductive

Special Purpose Proximity Sensor

E2CA

	Inductive displacement sensor.
	Linear 4 to 20 mA output for distance (from object to sensor).
	Accurate to 0.6 microns.
	AC and DC amplifiers available.
	Adjustable distance sensitivity.

Special Purpose Proximity Sensor

E2CD

	Inductive inspection sensor.
	High repeat accuracy �1 to 5 mm (�0.00004 in. to 0.0002 in.).
	Digital setting amplifier with built-in teach function.
	2 independent outputs for High/ Pass/Low discrimination

Optical Displacement

Laser Displacement Sensor

Z4M

	Infrared Class IIIb laser sensor with 1.5 micron resolution provides high-speed, precision distance measurement.
	-4 to +4 VDC analog output.
	Up to 140 mm sensing distance.
	Auto sensitivity minimizes errors.

Reflective Laser Sensor

Z4M-N30V

Visible RED, Class II laser sensor with 0.4 micron resolution provides stable detection of glossy and dark surfaces.

2 discrimination outputs with indicators.

4-20 mA analog output.

Hold and edge detection modes.

One-button set point programming.

Low Cost LED Displacement Sensor

Z4W-V

	Offers 10 micron resolution.
	Measurement point of 25 mm with range of �4 mm.
	Built-in amplifier.
	Visible beam means easy set-up
	Safety precautions of a laser-type light source not required.

Laser Displacement Sensor

Z4M-WR

	Visible RED, Class II laser sensor with 3 micron resolution offers long distance for in-line production inspection.
	4-20 mA analog output.
	3 selectable response speed levels.
	Up to 140 mm sensing range.
	Auto sensitivity minimizes errors.

Displacement and Parallel Beam Sensor

	Amplifier Supports displacement and parallel beamsensing applications.
	Diffuse distance measurement to 500 mm.
	Through-Beam measurement to 10 mm.
	Selectable linear analog output of 4-20 mA, 1-5 VDC, 0-5 VDC, � 4 VDC, � 5 VDC.
	Amplifier displays achieved resolution of application.
	3 discrimination outputs: High, Low, and Pass.
	FDA Class 1 and 2 visible red laser.
	PC interface for setup, monitoring, and direct data logging.

Optical Width

Parallel Beam Linear Sensor

Z4LA

	Laser width measurement sensor.
	Thru-beam Infrared Class lllB laser with 5 micron resolution.
	10 mm beam width and 1-5 VDC analog output for inspection and control.
	Maximum sensing distance of 300 mm.
	Minimum target size of 0.1 mm dia.

Parallel Beam Linear Sensor

Z4LB-V2

	Laser Width measurement sensor.
	Thru-beam visible RED Class ll laser with 5 micron resolution.
	10 and 30 mm beam widths.
	Amplifier with digital display.
	1 - 5 VDC analog output.
	2 discrimination outputs for inspection and control.
	Max. sensing distance of 300 mm
	Minimum target size of 0.1mm dia.

Parallel Beam Linear Sensor

Z4LC

	Laser Width measurement sensor.
	Thru-beam visible RED Class ll laser with 10 micron resolution.
	CCD receiver
	28 mm beam width.
	Amplifier with digital display.
	4-20 mA analog output.
	3 discrimination outputs and 9 operation modes including clear edge detection for inspection and control.

Displacement and Parallel Beam Sensor

	Amplifier Supports displacement and parallel beamsensing applications.
	Diffuse distance measurement up to 500 mm.
	Through-Beam measurement up to 10 mm.
	Selectable linear analog output of 4-20 mA, 1-5 VDC, 0-5 VDC, � 4 VDC, � 5 VDC.
	Amplifier displays achieved resolution of application.
	3 discrimination outputs: High, Low, and Pass.
	FDA Class 1 and 2 visible red laser.
	PC interface for setup, monitoring, and direct data logging.

Ultrasonic

Ultrasonic Displacement Sensor

E4DA

	Provides linear analog output.
	Beam detects objects regardless of color.
	Amplifier provides three inspection outputs: High / Pass / Low.
	One 4 to 20 mA output.